Description
SerenQ Peptide Pen 40mg (R&D Only)
SERIALISED & QR VERIFIED
Every SerenQ product carries a unique serial number and a QR code printed on the label. Scan it with any phone camera and you can independently confirm the pen is genuine SerenQ stock and check its batch details before you open the carton.
One code per pen. Each one can only be registered once, so a duplicate scan is an immediate red flag.
ABOUT MOTS-C
MOTS-c is a mitochondrial derived peptide, and that is what makes it unusual. It is a sixteen amino acid chain encoded not by nuclear DNA but by a short open reading frame inside the mitochondrial 12S rRNA gene. In other words the instructions for it sit in the mitochondria themselves rather than in the cell nucleus, which is why it is often described in the literature as a signal sent outward from the powerhouse rather than in to it.
Research attention has centred on metabolic regulation. Published work has examined AMPK pathway activation, glucose handling and insulin sensitivity, and the folate cycle, with animal studies reporting effects on metabolic flexibility and exercise capacity that led some researchers to describe it as an exercise mimetic. Circulating levels have also been reported to fall with age, which is the thread running through much of the longevity literature it appears in.
THE PEN FORMAT
This is where SerenQ does things differently. Instead of a lyophilised powder that has to be reconstituted, MOTS-c arrives as a solution already loaded into a graduated injection pen with a dial and a dose window.
- 40mg of MOTS-c per pen, in solution and ready to use
- 1 unit = 133mcg. 15 units on the dial gives 2mg
- 300 units in total, which works out at 20 full 2mg draws per pen
- Dial and dose window let you set the exact amount and read it back before dispensing
- 4 screw on pen tips supplied, individually sealed, 32G 0.23 x 4mm
- 4 alcohol swabs supplied
- Protective cap, clip and a rigid retail carton for storage and transport
- Batch number, expiry and serial printed directly on the pen barrel, not just the box
HANDLING AND STORAGE
- Store refrigerated at 2 to 8°C. Do not freeze
- Keep in the outer carton, away from direct light
- Short periods at room temperature during transit are expected and normal
- Use a fresh sealed tip for each dispense and dispose of tips in a sharps container
- Expiry 12/2027 on sealed, correctly stored stock
- Keep out of reach of children and animals
WHAT IS IN THE BOX
- 1 × SerenQ MOTS-c 40mg pre-filled injection pen
- 4 × sealed pen tips, 32G 0.23 x 4mm
- 4 × alcohol swabs
- Serialised, QR coded retail carton
FOR RESEARCH PURPOSES ONLY
This product is sold strictly as a laboratory research chemical. It is not a medicine, not a supplement and not a cosmetic. It is not for human or veterinary consumption, and it is not intended to diagnose, treat, cure or prevent any disease or condition.
MOTS-c is not licensed as a medicinal product by the MHRA, the FDA or any other regulator. Nothing on this page should be read as medical advice, a recommendation, or a suggestion of use in humans or animals.
By purchasing you confirm you are 18 or over, that you are acquiring this product for legitimate laboratory research or analytical use only, and that you accept full responsibility for its safe handling, storage and lawful use under the regulations that apply where you are.
Product Overview
The SerenQ Peptide Pen 40mg (R&D Only) provides researchers with a clearly identified peptide research product in a practical pen presentation.
Peptides are an important area of modern scientific research and are studied across disciplines including molecular biology, biochemistry, pharmacology, cellular research, analytical science, and protein science.
The SerenQ Peptide Pen can be considered for appropriate laboratory research where its verified composition and specifications are relevant to the experimental objective.
Because the product name alone does not establish the precise active peptide or formulation, researchers should always consult the manufacturer’s current product specification and available batch documentation before laboratory use.
Key Features
- Product: SerenQ Peptide Pen 40mg
- Research status: R&D Only
- Stated quantity: 40mg
- Format: Peptide pen
- Category: Research peptide product
- Intended application: Laboratory and scientific research
- Target users: Qualified researchers and appropriate laboratories
- Product documentation: Batch-specific documentation should be reviewed where available
- Market: UK research market, subject to applicable laws and regulations
- Presentation: Convenient and clearly identified research format
Ingredients & Composition
The SerenQ Peptide Pen 40mg should be evaluated according to the manufacturer’s verified product specification.
The product name does not provide sufficient information to establish the exact active peptide, peptide blend, excipients, stabilisers, buffers, or other formulation components. These details should therefore not be assumed or fabricated.
Before laboratory use, researchers should verify:
- Active peptide or peptide blend
- Stated quantity
- Purity information, where provided
- Excipients and formulation components
- Batch or lot number
- Certificate of Analysis (CoA)
- Manufacturing information
- Storage requirements
- Expiry or retest information
Where a Certificate of Analysis is supplied, the batch or lot number should correspond with the product documentation.
Peptide Research Information
Peptide research covers a broad range of scientific applications. Researchers may investigate peptide structure, stability, receptor interactions, molecular signalling, cellular responses, analytical characteristics, and other biological processes.
Depending on the verified composition of the SerenQ product, relevant laboratory research may involve areas such as:
- Peptide stability
- Molecular biology
- Peptide-receptor interactions
- Cellular signalling
- Biochemical research
- Analytical testing
- Protein and peptide science
- Laboratory method development
The specific research application should be determined by appropriately qualified researchers using validated laboratory procedures.
Research Benefits
From a laboratory and product-handling perspective, the SerenQ Peptide Pen 40mg may offer practical advantages including:
- Clearly identified research material
- Stated 40mg quantity
- Convenient pen presentation
- Easy product identification
- Practical format for controlled research workflows
- Research-use-only positioning
- Product documentation where available
These are product and research-related characteristics, not claims that the product provides medical, therapeutic, cosmetic, or performance benefits.
Recommended Research Use
The SerenQ Peptide Pen 40mg (R&D Only) is intended exclusively for laboratory and scientific research.
No human dosing or administration instructions are provided. Researchers should establish their own experimental procedures based on validated laboratory protocols, institutional requirements, appropriate risk assessments, and applicable UK regulations.
This product should not be self-administered or used as a substitute for an approved medicinal product.
Stacking & Combination Research
Research programmes may sometimes investigate multiple peptides or other compounds together. However, combining research compounds can introduce additional variables and potential interactions.
For this reason, we do not provide human-use stacking protocols or combination dosing recommendations.
Where combination research is scientifically justified, qualified researchers should independently evaluate the identity, purity, stability, compatibility, and potential interactions of each compound before incorporating them into an experimental programme.
Safety & Precautions
For research use only. Not for human consumption.
Researchers should:
- Handle the product only in an appropriate laboratory environment.
- Follow established laboratory safety procedures.
- Use appropriate personal protective equipment where required.
- Avoid contamination during research handling.
- Keep research materials away from children and unauthorised individuals.
- Follow the manufacturer’s current storage requirements.
- Inspect packaging and labelling before use.
- Verify the batch or lot number against available documentation.
- Review the applicable Certificate of Analysis where provided.
- Dispose of research materials according to appropriate laboratory and local requirements.
Do not self-administer this product or use it to treat, prevent, or diagnose a medical condition.
Why Buy SerenQ Peptide Pen 40mg (R&D Only) From Us?
When purchasing research peptides, clear product information and a professional purchasing experience are important.
We aim to provide UK customers with straightforward product information so researchers can understand what they are purchasing before placing an order.
When you purchase SerenQ Peptide Pen 40mg (R&D Only) from us, you can expect:
- Clearly identified R&D-only products
- Straightforward product descriptions
- Professional customer support
- Secure ordering
- UK-focused service
- Transparent research-use positioning
- Product documentation where available
- Clear safety and research disclaimers
- A focus on accurate product information
- Clear communication about product specifications
We recommend reviewing the product specification and available batch documentation before laboratory use.
Storage Information
Storage requirements depend on the specific formulation and manufacturer’s instructions.
Always follow the current storage requirements supplied with the specific SerenQ product and batch. Do not assume storage conditions without consulting the relevant documentation.
For the most accurate information, refer to the product packaging, manufacturer’s specification, and Certificate of Analysis where available.
Frequently Asked Questions
What is SerenQ Peptide Pen 40mg?
SerenQ Peptide Pen 40mg (R&D Only) is a research-use-only peptide product presented in a pen format with a stated 40mg quantity for qualified laboratory and scientific research.
What peptide is contained in the SerenQ Peptide Pen?
The exact active peptide or peptide blend should be confirmed using the manufacturer’s current product specification. The product name alone is not sufficient to establish the complete formulation.
Is SerenQ Peptide Pen 40mg intended for human use?
No. The product is presented strictly for research purposes and is not intended for human consumption or self-administration.
What does 40mg refer to?
The product is identified with a stated quantity of 40mg. Researchers should verify the exact specification and batch documentation before laboratory use.
Can the SerenQ Peptide Pen be combined with other research compounds?
No human-use stacking recommendation is provided. Any combination research should be scientifically justified and evaluated by appropriately qualified researchers.
Who is this product intended for?
The product is intended for qualified researchers, laboratories, and appropriate scientific research environments capable of safely and lawfully handling research-use-only materials
Important Research Disclaimer
SerenQ Peptide Pen 40mg (R&D Only) is supplied strictly for laboratory research purposes. It is not a medicinal product and is not intended to diagnose, treat, cure, or prevent any disease or medical condition. It is not intended for human consumption or self-administration. Purchasers are responsible for ensuring that the purchase, possession, storage, handling, and research use of this product comply with all applicable laws, regulations, and institutional requirements.
Reviews
There are no reviews yet.